MODEL: BTM-3000
Fresh and powerful BTM-3000 can generate super acid water enough to be regarded as medical degree and also offer you drinkable alkaline water. Super Acid Water can be utilized as anti-bacteria and anti-germ.
| Method | Reservoir type |
| Rated voltage | AC 220V 50~80Hz(voltage changeable) |
| Rated Input Voltage | 0.5A |
| Rated power consumption (If strong electrolyzed water is created) |
45W(90W) |
| Electrolysis hour | Standard about 20 min./strong electrolyzed water about 10 min./drinking water |
| Supply amount | Acidic water 2.0ℓ, alkaline water:2.0ℓ |
| Strong electrolyzed water (If table salt is added) |
pH 2.7 or low, oxidation potential +1100mv or above |
| Super oxide water, reducing water | pH 11.3 or above, reduction potential -650mV or below |
| Size | 366x290x200(HxWxD)m/m |
| Weight About | 3Kg |
| Accessories | Two 2ℓ polyester container one measuring spoon, 1st reagent (HDA reagent) 1EA, 2nd reagent (HDA reagent) 1EA |
| Medical Device Item Approval | KFDA No. 889 |
Model: BTM-105D
 You can check each of ionizing steps with easiness just on the window panel on the facet set. |
 You can select 4 steps of alkaline water, purified water and
1 step of acidic water with the control panel on the top. |
| Rated Voltage | 120V or 220~240V / 50Hz or 60Hz |
| Dimension | 320×400×140(W×H×D)mm * Weight : 7.0Kg |
| Water Pressure available | 0.7 ~6.0kgf/cm2 |
| Tap water's temperature available | 5 ~ 30°C |
| Protection devices | 2 temp. sensors built-in |
| Electrolysis Method | Continuous |
| Electrode | 5 Plates (Platinized Titanium) Basis, 7 Plates (Optional) |
| Generating Capacity | Standard (1.5L/min. at 2.0kgf/cm2) Max. (3.3L/min. at 3.3kgf/cm2) |
| Settings | Alkaline Water(5steps), Purified Water, Acidic Water(1step) |
| Cleaning | Real Time Cleaning ; About 30sec. every 10L use (Drain:0.2L) |
| Filter Replacement | Cartridge Type (Built-in 2 filters) |
| Filter Life | 1st phase filter(3,000L), 2nd phase filter(4,000L) |
| Filter Media | 15steps (PP Plane Filter, Calcium Sulfite, Granular Activated Carbon, Silver Nano Activated Carbon, UF membrane) |
| Voice Information System |
Model: RP3
- Depending on the amount and the speed of a running of raw water into the product
- Voice Alert for Each Functional Buttons, ON/OFF Power Management on Large LED Display
- Patents on diaphragm Membrane Structure including Electrode Plate for the Electrolytic Cell of Water Ionizer
- Automatic Detecting on Filter Usage and Measuring the Lifespan at the same time
- Easily Detach or Attach the filter cover when change the filter
| Description | Specification |
|---|---|
| Electricity | AC110/220V, 50/60Hz |
| Power Consumption | 150W |
| Size, weight(with filter) | 425W × 312H × 124D, 6.9kg |
| Type | Standing or wall-mounted |
| Water Supply | Direct connection to tap water |
| Available Temperature | 5 ~ 35˚C |
| Available Water Pressure | ~ 3.0kgf/cm² |
| Electrolysis | Continuous electrolysis |
| Display | pH, Filter life |
| On/Off | Ceramic Valve |
| Output Capacity(Alkaline) | ~ 2.0ltr/min(±10%) |
| Output Water |
4 types of Alkaline(pH8.5/9.0/9.5/10.0) 1 types of Purified 2 types of Acidic(High/Low) |
| Electrolysis Cell | Platinum Titanium Electrode Plate |
| Electrode Cleaning | Automatic After-Cleaning |
| Filter Type | 3 Composite Filters |
| Filter Life | 6 and 12 months |
| Protection | Automatic over-current and over-heating protection |
